FREEZING WATER

Today's post is very simple and short, but might not be readily known by many photographers. When you are required to photograph moving water within a steel environment such as a sink, always use a flash.



The strobe of light will stop all motion, and will dramatically enhance the stainless steel background. Normal house interior lighting is often not adequate to get a bold, sharp photo with a neutral color cast. Make sure, however, not to simply point your camera flash at the water. It should be diffused or reflected off of a very large surface. One idea is to shoot your flash into a large piece of white bristol board that is angled for the water, or another option is to shoot the flash through large diffusion material such as a bedsheet.

As always, I try to make these posts accessible to those who cannot afford professional gear. When the time comes to buy your first light kit, spend the money to get the largest softbox you can afford. The larger the softbox, the better the picture (in most cases!)

Email this Blog to a friend. To see more photographs by Mark Hemmings, click here. ALL PHOTOS COPYRIGHT MARK HEMMINGS